1966 Shelby GT350 Hertz Edition

1966 Shelby GT350 Hertz Edition Side Profile

What is there not to love about the 1966 Shelby GT350 Hertz edition? This beauty was designed and trimmed with Hertz Corporation colors of black and gold were built with this color scheme. This super beauty was pitched to Hertz for use in their rental program for the Sports Car Club. The Shelby is world renowned for its sporty design and performance.

The Shelby GT350 features a V8 engine with a 4736 displacement. A Borg Warner T-10 4 speed manual transmission was perfect for this car, and it had the loud and powerful roar you expect from a sport engine. When Hertz decided to promote this car it was presented as a “rent a racer”. This was a great way to build additional interest in the Shelby Mustang combination.

One of the features that made this vehicle a spectacular find was the dual point distributor. It was truly designed with the racer in mind. Although the car is far from being a comfortable drive, it is an excellent addition that any collector and avid car fan would love to have in their collection.

The Shelby GT350 Hertz edition uses a recirculating ball steering system. This operates differently from the standard Rack and Pinion steering, but recirculating ball steering is still quite common in many SUVs and trucks on the market today.

The steel and fiberglass body sits atop a unibody build. The suspension in the front has unequal arms with coil springs and adjustable tube arms. The 1966 Shelby also features an anti-sway bar. The rear suspension, in contrast operates with live axle, multi-leaf springs. It also features tube shocks.

Above all, the 1966 Shelby GT350 Hertz edition was known for performance. In its prime, it could go from 0 – 60 in 7.3 seconds and turned in quarter mile speeds of 15.6 seconds at 94 mph. The top speed was 124 mph at 7000 rpm.

1966 Shelby GT350 Hertz Edition Photos:

Continue Reading


1999 Shelby Series 1

Legendary American automotive designer and entrepreneur Carroll Shelby left behind a long-lasting legacy spanning several decades, resulting in several performance-oriented vehicles bearing his name in some form or another. The 1999 Shelby Series 1 roadster happens to be one of his lesser-known creations, but it is perhaps the most significant of his illustrious career. The Series 1 represented an effort to create a high-performance roadster from the ground up, utilizing an original design developed by Shelby himself.

Unlike many of Shelby’s past creations, the Series 1 was designed and engineered on a clean sheet of paper. The exterior design more plenty of passing resemblance to the Shelby AC Cobra and Shelby Daytona Coupe, but that’s largely where the resemblances end. Underneath, the Series 1 utilized a dual wishbone suspension with inboard-mounted coil-over dampers actuated by rocker arms. The chassis was constructed from 6061 aluminum that was extruded, formed and welded together. Aluminum honeycomb panels made up the majority of the floor boards and rocker panels. Carbon fiber and fiberglass laminate was employed for the body panels throughout the car.

Power for the 1999 Shelby Series 1 came courtesy of a 4.0-liter DOHC eight-cylinder engine sourced from the Oldsmobile Aurora, mounted well behind the front axle. In regular tune, this engine produced 320 horsepower and 290 pound-feet of torque. Coupled with a six-speed manual transmission supported in a torque tube, it was capable of reaching 60 mph from a standstill in 4.4 seconds and breaking the quarter mile in 12.8 seconds at 112 mph. With a top speed of 170 mph, the Series 1 proved 15 mph faster than the top speed of its spiritual predecessor, the 427 cubic-inch variant of the Shelby Cobra.

A total of 249 Series 1 roadsters were built as 1999 models between 1998 and 2004 out of a planned 500 examples. The remaining roadsters were built as component cars in 2005 due to federal re-certification costs. Component cars were delivered to customers with no engine or transmission.

1999 Shelby Series 1 Photos

Continue Reading

1965 Shelby GT350 Fastback

1965 Shelby GT350

One of the most beloved automobiles in American automobile lore is the 1965 Shelby GT350 Fastback. This car symbolizes the epitome of American muscle cars. Automobile visionary Lee Iacocca knew that he wanted to make a car that would be remembered, and teamed up with racing industry success Carroll Shelby. The sleek look, the proven power, and the famed white with blue stripes of the Shelby Cobra made this vehicle a marvel to look at.

The Shelby GT350 was manufactured from 1965 – 1968. This machine can go from 0 – 60 in 6.7 seconds, and reaches top speed at 137 mph. This Shelby has a V8 engine, and sported a 4 speed Borg-Warner transmission with an aluminum case to reduce overall weight.

Ford wanted a car that would be used for racing as well as for enthusiastic drivers. However, with an asking price of just over $4,500.00, there were not too many people who could afford the vehicle upon its introduction in 1965. Fortunate owners were far from disappointed in their pricey purchase.

One of the most noted features of the Shelby GT350 is that it does not have a back seat. This was due to racing regulations in the SCCA not allowing anything over a two-seater. In place of the seat was fiberglass flooring and a spare tire placed under the rear window. The 1965 Shelby GT350 is one of the best known pony cars. Although its initial sales looked dismal, it is a time tested classic that has been re-released.

1965 Shelby GT350 Fastback Photo Gallery:

Continue Reading